Power Draw Bar Install Tormach P/N 31706 for PCNC 1100 Part 8 - Drawbar Wrench's

DIN 894 27mm, 24mm, 20mm & 13mm wrench's

DIN 894 20mm and DIN 894 13mm wrench's

The 20mm wrench is used to hold the spindle in order tighten the draw bar

The 13mm wrench is used to tighten the draw bar

DIN 894 27mm and DIN 894 24mm wrench's

The 27mm wrench is used to hold the cylinder rod from rotating

The 24mm wrench will be used to tighten the cylinder rod hex bolt