Power Draw Bar Install Tormach P/N 31706 for PCNC 1100 Part 8 - Drawbar Wrench's

DIN 894 27mm, 24mm, 20mm & 13mm wrench's

DIN 894 20mm and DIN 894 13mm wrench's

The 20mm wrench is used to hold the spindle in order tighten the draw bar

The 13mm wrench is used to tighten the draw bar

DIN 894 27mm and DIN 894 24mm wrench's

The 27mm wrench is used to hold the cylinder rod from rotating

The 24mm wrench will be used to tighten the cylinder rod hex bolt

Power Draw Bar Install Tormach P/N 31706 for PCNC 1100 Part 7 - Drawbar Lube

Manual Draw Bar Left

Power Draw Bar Right

Sliding and threaded parts lubricated with Anti-Seize

Spring Washers removed from Power Draw Bar

 

Shoulder of Power Draw Bar lubricated with Anti-Seize

 

First Spring Washer lubricated with Anti-Seize

Second Spring Washer lubricated with Anti-Seize

First Spring Washer pair lubricated with Anti-Seize

Four Spring Washer pairs lubricated with Anti-Seize

Power Draw Bar Bushing lubricated with Anti-Seize

Power Draw Bar Threads lubricated with Anti-Seize

Tormach TTS collet  lubricated with Anti-Seize

Power Draw Bar Install Tormach P/N 31706 for PCNC 1100 Part 6 - Washer Cover