Power Draw Bar Install Tormach P/N 31706 for PCNC 1100 Part 9 - TTS Parking Tool

The power draw bar install manual recommends the following:

"It is NOT recommended to allow the power draw to reside 

in the  clamped position with no tool holder in place"

 "This may put undue stress on the TTS collet."

So rather than leave a TTS tool holder in the TTS collet when the machine is not in use I made a TTS parking tool

 

Building the lefting bar for the Tormach PCNC 1100 Series 3

 

 

Steel Eyebolt 1/2"-13 with shoulder for lifting P/N 3014T254

3-Each Full Thread T-Slot Nut 1/2"-13 for 5/8 Slot P/N 94750A584

2 Each 1/2"-13 x1" Long Hex Bolts

2 Each washers for 1/2"-13 Hex Bolts

Measuring length for the chain