Power Draw Bar Install Tormach P/N 31706 for PCNC 1100 Part 1 - Disassembly

Spindle Lock Out Safety Tab

Remove Spindle Lock Out Safety Tab

Spindle Lock Arm Assembly

Spring Removed

Spindle Lock Arm Removed

Removing Spindle Lock Pin

Removed Spindle Lock Pin

Spindle Lock Assembly Removed

Loosen the Phillips Head Screw
 on the Pulley Retaining Nut

Remove the Phillips Head Screw
 on the Pulley Retaining Nut

Use Spanner Pin Wrench P/N 31118 
To Remove the Pulley Retaining Nut

This completes Part 1 - Disassembly